Glove Box Laser Welding Packaging Process
When specific factors these types of as semiconductor products, built-in circuits, and optoelectronic devices are subjected to laser welding and packaging operations, the welding supplies are exposed to the air and are particularly vulnerable to oxidation beneath large temperature situations, resulting in welding defects these types of as porosity, slag inclusions, cracks, and very low welding toughness. , Leading to soaring failure premiums such as very poor airtightness, very low energy, and impact resistance of the machine, specifically the impact resistance defect will induce destruction to the device flying higher Mach, creating big protection incidents and property losses. At existing, the domestic industry urgently requires a The laser welding packaging machine that can be employed underneath vacuum problems or underneath special environment protection circumstances has a good guy-equipment surroundings and adaptable devices to fulfill the demands of superior-close equipment, particularly special units for high-velocity aerospace cars.
Etelux gives a laser welding glove box dependent on atmospheric security. To remedy the results of air humidity and air impurities in laser welding, the glove box has two 90-diploma sq. cabins, the remaining side is the heating cabin, and the ideal side For the transitional cabin, the highest temperature of the heating cabin is two hundred ℃, the heating plate can be cooled fast at the exact same time, the exterior of the sq. cabin doorway is a manual door, the internal door is an automatic door, the interior and outer doorways are interlocked, the glove box is managed to be cleaned by a movement meter, and can also be linked to the purification system. Its attributes are: reduced leakage, lower drinking water and oxygen content material in the box, secure total tools functionality, and legitimate and reputable h2o and oxygen detection.